Cute! So many options! Al. From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Mark J. Blair Sent: Tuesday, 2 January 2018 4:18 PM To: hecnet at Update.UU.SE Subject: Re: [HECnet] pdp-11/VAX racks and chassis free to good home On Jan 1, 2018, at 20:29, Boyanich, Alastair <Alastair.Boyanich at au.fujitsu.com<mailto:Alastair.Boyanich at au.fujitsu.com>> wrote: Second rack is a little knee high one that the 11v03 (Yep it?s v03 not /03) came in. Faux wood and round bubble wheels. Interesting! I have an 11V03-L system, but the little rack it came in is styled like the larger ones with rounded corners and dark side panels: http://www.nf6x.net/2014/03/data-general-nova-3-and-dec-pdp-11v03-l/img_085… -- Mark J. Blair, NF6X <nf6x at nf6x.net<mailto:nf6x at nf6x.net>> http://www.nf6x.net/ Disclaimer The information in this e-mail is confidential and may contain content that is subject to copyright and/or is commercial-in-confidence and is intended only for the use of the above named addressee. If you are not the intended recipient, you are hereby notified that dissemination, copying or use of the information is strictly prohibited. If you have received this e-mail in error, please telephone Fujitsu Australia Limited on 02 9776 4555 or by reply e-mail to the sender and delete the document and all copies thereof. Whereas Fujitsu Australia Limited would not knowingly transmit a virus within an email communication, it is the receiver?s responsibility to scan all communication and any files attached for computer viruses and other defects. Fujitsu Australia Limited does not accept liability for any loss or damage (whether direct, indirect, consequential or economic) however caused, and whether by negligence or otherwise, which may result directly or indirectly from this communication or any files attached. If you do not wish to receive commercial and/or marketing email messages from Fujitsu Australia Limited, please email unsubscribe at au.fujitsu.com.

I wish you could. ? Hand luggage! Amusingly, this would?ve been around 2001 and I was in W.A which had a lot of mining and exploration around then and hardware dumped on the local Ross?s Auctions in Maylands. Myself and some old Uni buddies bought a 1.5m high plastic wrapped pallet of SGI Octanes (mostly 1.3 and a few 1.2 xbow?s) and we stripped them all, divvied up the parts and made a couple of extremely good machines each and traded parts on the uni notice boards with some other enthusiasts. All of this for a few hundred dollars ? bargain. Another mate from that group was living in Melbourne and came to visit. He saw the three Octanes I had and and desperately wanted an octane. I?ll not so anonymously call this mate ?Mick?. So I offered him one if he could organise his own shipping, to which he very readily agreed given he was a passionate Indy user. Crazy enthusiastic and he had no time left to organise it properly and flew Qantas back to Melbourne (4.5-5hr flight) with the thing on his lap with a pillow underneath. He was definitely keen as all get-out. Lucky no DVT or something. I often think of Mick and his Octane as being the most serious hand-luggage I?ve ever seen. Sadly he?s not into SGI Mips gear any longer. Al. From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Tomas Prybil Sent: Wednesday, January 3, 2018 8:08 AM To: hecnet at Update.UU.SE Subject: Re: [HECnet] pdp-11/VAX racks and chassis free to good home Great piece. I?m in Australia on vacation and would have loved to put the machine as handluggage on my returntrip?.. /t Fr?n: <owner-hecnet at Update.UU.SE<mailto:owner-hecnet at Update.UU.SE>> p? uppdrag av "Boyanich, Alastair" <Alastair.Boyanich at au.fujitsu.com<mailto:Alastair.Boyanich at au.fujitsu.com>> Svara till: <hecnet at Update.UU.SE<mailto:hecnet at Update.UU.SE>> Datum: tisdag 2 januari 2018 18:41 Till: "hecnet at Update.UU.SE<mailto:hecnet at Update.UU.SE>" <hecnet at Update.UU.SE<mailto:hecnet at Update.UU.SE>> ?mne: RE: [HECnet] pdp-11/VAX racks and chassis free to good home Cute! So many options! Al. From: owner-hecnet at Update.UU.SE<mailto:owner-hecnet at Update.UU.SE> [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Mark J. Blair Sent: Tuesday, 2 January 2018 4:18 PM To: hecnet at Update.UU.SE<mailto:hecnet at Update.UU.SE> Subject: Re: [HECnet] pdp-11/VAX racks and chassis free to good home On Jan 1, 2018, at 20:29, Boyanich, Alastair <Alastair.Boyanich at au.fujitsu.com<mailto:Alastair.Boyanich at au.fujitsu.com>> wrote: Second rack is a little knee high one that the 11v03 (Yep it?s v03 not /03) came in. Faux wood and round bubble wheels. Interesting! I have an 11V03-L system, but the little rack it came in is styled like the larger ones with rounded corners and dark side panels: http://www.nf6x.net/2014/03/data-general-nova-3-and-dec-pdp-11v03-l/img_085… -- Mark J. Blair, NF6X <nf6x at nf6x.net<mailto:nf6x at nf6x.net>> http://www.nf6x.net/ Disclaimer The information in this e-mail is confidential and may contain content that is subject to copyright and/or is commercial-in-confidence and is intended only for the use of the above named addressee. If you are not the intended recipient, you are hereby notified that dissemination, copying or use of the information is strictly prohibited. If you have received this e-mail in error, please telephone Fujitsu Australia Limited on 02 9776 4555 or by reply e-mail to the sender and delete the document and all copies thereof. Whereas Fujitsu Australia Limited would not knowingly transmit a virus within an email communication, it is the receiver?s responsibility to scan all communication and any files attached for computer viruses and other defects. Fujitsu Australia Limited does not accept liability for any loss or damage (whether direct, indirect, consequential or economic) however caused, and whether by negligence or otherwise, which may result directly or indirectly from this communication or any files attached. If you do not wish to receive commercial and/or marketing email messages from Fujitsu Australia Limited, please email unsubscribe at au.fujitsu.com<mailto:unsubscribe at au.fujitsu.com>. Disclaimer The information in this e-mail is confidential and may contain content that is subject to copyright and/or is commercial-in-confidence and is intended only for the use of the above named addressee. If you are not the intended recipient, you are hereby notified that dissemination, copying or use of the information is strictly prohibited. If you have received this e-mail in error, please telephone Fujitsu Australia Limited on 02 9776 4555 or by reply e-mail to the sender and delete the document and all copies thereof. Whereas Fujitsu Australia Limited would not knowingly transmit a virus within an email communication, it is the receiver?s responsibility to scan all communication and any files attached for computer viruses and other defects. Fujitsu Australia Limited does not accept liability for any loss or damage (whether direct, indirect, consequential or economic) however caused, and whether by negligence or otherwise, which may result directly or indirectly from this communication or any files attached. If you do not wish to receive commercial and/or marketing email messages from Fujitsu Australia Limited, please email unsubscribe at au.fujitsu.com.