12 Mar
2023
12 Mar
'23
4:22 a.m.
Hello all - long time member of the list, and about time for me to get a
machine connected. I have a PiDP-11 running RSX-11M-PLUS 4.6 and BQTCP/IP.
It's emulated, but is up 24/7 and I'm interested in allowing guest logins
or other remote use of the machine. (Even if only to keep those sweet
blinkenlights moving around in more interesting patterns than the idle
loop!)
I'm in Northern Virginia, USA and see that there are two areas in my
neighborhood, 59 and 31.
Who would I reach out to regarding connection to either area?
Also - I'm no RSX-11m wizard (still learning), so I'd be interested in any
pointers to the incantations necessary to forge the Multinet connection
from RSX-11M-PLUS (if this is indeed the recommended approach).
Thanks all - looking forward to getting packets flowing.
- Mike
12 Mar
12 Mar
4:34 a.m.
Hi.
On 2023-03-12 04:22, Mike Shields wrote:
Hello all - long time member of the list, and about
time for me to get a
machine connected. I have a PiDP-11 running RSX-11M-PLUS 4.6 and
BQTCP/IP. It's emulated, but is up 24/7 and I'm interested in allowing
guest logins or other remote use of the machine. (Even if only to keep
those sweet blinkenlights moving around in more interesting patterns
than the idle loop!)
I'm in Northern Virginia, USA and see that there are two areas in my
neighborhood, 59 and 31.
Who would I reach out to regarding connection to either area?
Also - I'm no RSX-11m wizard (still learning), so I'd be interested in
any pointers to the incantations necessary to forge the Multinet
connection from RSX-11M-PLUS (if this is indeed the recommended approach).
Thanks all - looking forward to getting packets flowing.
Well, basically, you start by talking to me, and we figure out who to
loop in to get you connected. As you have RSX all setup, it's obviously
fairly easy to just use that as you connection system.
With Virginia, I guess Supratim Sanyal or Peter Lothberg are your two
options, indeed. So one of them looped in, assigning some addresses for
you, and setting up their end of a Multinet link.
Then you configure your machine with the right DECnet address, and the
Multinet link with the right parameters, and you should be up and running.
See also http://mim.stupi.net/hecnet.htm just in case you haven't seen it.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt(a)softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
11:18 p.m.
Mike,
I have several RSX11M+ nodes on HECnet in Area 30 some are PiDP-11/70s and some are
real PDP-11/83s. I’ve connected a few links using Johnny’s BQ/TCP and the IP-0-n DEnet
circuits configured with his MNC utility. If you have any questions feel free to drop me
an email. I’d be glad to provide example code samples.
I am based in Canyon Lake, Texas.
Best,
Mark
On Mar 11, 2023, at 9:22 PM, Mike Shields
<mike(a)shieldsworld.com> wrote:
Hello all - long time member of the list, and about time for me to get a machine
connected. I have a PiDP-11 running RSX-11M-PLUS 4.6 and BQTCP/IP. It's emulated, but
is up 24/7 and I'm interested in allowing guest logins or other remote use of the
machine. (Even if only to keep those sweet blinkenlights moving around in more interesting
patterns than the idle loop!)
I'm in Northern Virginia, USA and see that there are two areas in my neighborhood, 59
and 31.
Who would I reach out to regarding connection to either area?
Also - I'm no RSX-11m wizard (still learning), so I'd be interested in any
pointers to the incantations necessary to forge the Multinet connection from RSX-11M-PLUS
(if this is indeed the recommended approach).
Thanks all - looking forward to getting packets flowing.
- Mike
_______________________________________________
HECnet mailing list -- hecnet(a)lists.dfupdate.se
To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se
13 Mar
13 Mar
12:27 p.m.
Hi Mike,
Once you are ready to establish a MULTINET TCP uplink, I can give you 31.xx DECnet
addresses and the MULTINET/TCP endpoint to connect to.
BTW, I currently use DECnet/Python for HECnet.
Let me know when you are ready.
Regards,
Supratim
On Mar 12, 2023, at 6:18 PM, Mark Matlock
<mark(a)matlockfamily.com> wrote:
Mike,
I have several RSX11M+ nodes on HECnet in Area 30 some are PiDP-11/70s and some are
real PDP-11/83s. I’ve connected a few links using Johnny’s BQ/TCP and the IP-0-n DEnet
circuits configured with his MNC utility. If you have any questions feel free to drop me
an email. I’d be glad to provide example code samples.
I am based in Canyon Lake, Texas.
Best,
Mark
On Mar 11, 2023, at 9:22 PM, Mike Shields
<mike(a)shieldsworld.com> wrote:
Hello all - long time member of the list, and about time for me to get a machine
connected. I have a PiDP-11 running RSX-11M-PLUS 4.6 and BQTCP/IP. It's emulated, but
is up 24/7 and I'm interested in allowing guest logins or other remote use of the
machine. (Even if only to keep those sweet blinkenlights moving around in more interesting
patterns than the idle loop!)
I'm in Northern Virginia, USA and see that there are two areas in my neighborhood, 59
and 31.
Who would I reach out to regarding connection to either area?
Also - I'm no RSX-11m wizard (still learning), so I'd be interested in any
pointers to the incantations necessary to forge the Multinet connection from RSX-11M-PLUS
(if this is indeed the recommended approach).
Thanks all - looking forward to getting packets flowing.
- Mike
_______________________________________________
HECnet mailing list -- hecnet(a)lists.dfupdate.se
To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se
_______________________________________________
HECnet mailing list -- hecnet(a)lists.dfupdate.se
To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se
411
days inactive
412
days old
3 comments
4 participants
participants (4)
-
Johnny Billquist -
Mark Matlock -
Mike Shields -
Supratim Sanyal