On Sep 25, 2022, at 5:44 AM, Johnny Billquist <bqt@softjar.se> wrote:

Uh... Do you have Phase V installed?

Hehe - It’s VAX VMS 2.0 running DECnet 1.3 which I think is phase II based on the gunkies post at https://gunkies.org/wiki/Installing,_Configuring,_and_Testing_DECnet_V1.3_on_VMS_V2.0

Is the person who wrote this in this list?




 Johnny

On 2022-09-25 03:19, Supratim Sanyal wrote:
On 9/24/22 10:18 AM, Johnny Billquist wrote:
Try to give more information in the command instead of going through some interactive more where you answer every question?

DEFINE NODE NAME XX ADD 43
DECnet/VAX 1.3 NCP is very different. There was a "AA-H803C-TE DECnet-VAX System Manager's Guide" that I cannot find a PDF of in the usual places. Is it trying to log in to itself using some account that does not exist? UAF has nothing other than SYSTEM, FIELD, SYSTEST AND DEFAULT.
I have DECnet/Python on the other side of the DDCMP link.
$ SET DEF <SYSEXE>
$ MCR SYSGEN
SYSGEN>  CONNECT NET/NOADAPTER/DRIVER=NETDRIVER
SYSGEN>  EXIT
$ SH SYS
    VAX/VMS  Processes on        24-SEP-1980 01:08:13.87 Uptime  0 00:01:04
    Pid    Process Name     UIC  State Pri Dir. I/O    CPU Page flts Ph.Mem
  00010000 NULL           000,000 COM    0        0 00:01:01.22 0    0
  00010001 SWAPPER        000,000 HIB   16        0 00:00:00.03 0    0
  00010017 ERRFMT         001,006 HIB    8        6 00:00:00.05 29   30
  00010018 OPCOM          001,004 LEF    7        2 00:00:00.04 32   36
  00010019 JOB_CONTROL    001,004 HIB    9        5 00:00:00.03 33   80
  0001001A DRA0ACP        001,003 HIB    8      103 00:00:00.18 64  110
  0003001B SYSTEM         001,004 CUR    4       11 00:00:00.64 160   88
$ SH DEV X
  List of Devices               on      24-SEP-1980 01:08:29.04
  Device   Device      Device       Err.    Volume         Free Trans Mount
  Name     Status  Characteristics Count     Label        Blocks Count Count
  XMA0:    on line                     0
  XMB0:    on line                     0
$ SH DEV N
  List of Devices               on      24-SEP-1980 01:08:32.58
  Device   Device      Device       Err.    Volume         Free Trans Mount
  Name     Status  Characteristics Count     Label        Blocks Count Count
  NLA0:    on line                     0
  NET0:    on line                     0
$ MCR NCP
NCP>PURGE LOCAL
NCP>PURGE KNOWN REMOTES
%NCP-E-DELERR, error deleting file SYS$SYSTEM:RMTNODE.DAT
-RMS-E-FNF, file not found
NCP>PURGE KNOWN LINES
%NCP-E-DELERR, error deleting file SYS$SYSTEM:LINE.DAT
-RMS-E-FNF, file not found
NCP>PURGE KNOWN OBJECTS
%NCP-E-DELERR, error deleting file SYS$SYSTEM:OBJECT.DAT
-RMS-E-FNF, file not found
NCP>
%NCP-E-BADPARS, unrecognized parameter "_NA"
<SET/ZERO/LOAD/PURGE/LIST/DEFINE/DISCONNECT/LOOP/SHOW/MODIFY/EXIT>:
%NCP-E-BADPARS, unrecognized parameter "_NA"
<SET/ZERO/LOAD/PURGE/LIST/DEFINE/DISCONNECT/LOOP/SHOW/MODIFY/EXIT>:DEFINE LOCAL NAME XX NUMBER 43 MAXLINKS 200 MAXNODES 128
%NCP-S-RECADD, new database record added
NCP>LIST LOCAL
CONFIGURATION DATABASE LOCAL NODE
LOCAL NODE NAME: XX
LOCAL NODE NUMBER: 43
MAXIMUM NUMBER OF LOGICAL LINKS: 200
MAXIMUM NUMBER OF REMOTE NODES: 128
NCP>
%NCP-E-BADPARS, unrecognized parameter "_NA"
<SET/ZERO/LOAD/PURGE/LIST/DEFINE/DISCONNECT/LOOP/SHOW/MODIFY/EXIT>:
%NCP-E-BADPARS, unrecognized parameter "_NA"
<SET/ZERO/LOAD/PURGE/LIST/DEFINE/DISCONNECT/LOOP/SHOW/MODIFY/EXIT>:DEFINE OBJECT   NAME NICE NUMBER 19 FILE NICE PRIVILEGES DIAGNOSE OPER
%NCP-S-RECADD, new database record added
NCP>DEFINE OBJECT NAME REMACP NUMBER 23 FILE REMACP
%NCP-E-BADPARS, unrecognized parameter ""
PRIVILEGES NEEDED TO ACCESS OBJECT<OPER,DIAGNOSE,LOG_IO,...CMKRNL>:_NA
%NCP-S-RECADD, new database record added
NCP>LIST
<LOCAL/REMOTE/OBJECT/LINE/KNOWN>:OBJECT
OBJECT NAME(1-8 CHARS):NICE
CONFIGURATION DATABASE OBJECT NICE
NETWORK WIDE NUMBER:  19
ASSOCIATED FILE NAME:  NICE
ACCESS PRIVILEGES:
                        DIAGNOSE
                        OPER
NCP>SET STATE LOCAL ON
   Opcom, 01:13:31.97, NETACP       Accnt=
   Opcom, DECnet starting
%NCP-E-CINREJ, unable to complete network $assign
-SYSTEM-F-INVLOGIN, login information invalid at remote node
NCP>SET STATE LINE DMC11_0 ON
%NCP-E-CINREJ, unable to complete network $assign
-SYSTEM-F-INVLOGIN, login information invalid at remote node
NCP>EXIT
$ TYPE SYSUAF.LIS
       Owner         Username        UIC    Account  Privs Pri Default Directory
                     DEFAULT      [200,200]          Devour  4 [200,200]
FIELD SERVICE        FIELD        [001,010] FIELD    All     4 [SYSMAINT]
SYSTEM MANAGER       SYSTEM       [001,004] SYSTEM   All     4 [SYSMGR]
SYSTEST-UETP         SYSTEST      [001,007] SYSTEST  All     4 [SYSTEST]
_______________________________________________
HECnet mailing list -- hecnet@lists.dfupdate.se
To unsubscribe send an email to hecnet-leave@lists.dfupdate.se

--
Johnny Billquist                  || "I'm on a bus
                                 ||  on a psychedelic trip
email: bqt@softjar.se             ||  Reading murder books
pdp is alive!                     ||  tryin' to stay hip" - B. Idol
_______________________________________________
HECnet mailing list -- hecnet@lists.dfupdate.se
To unsubscribe send an email to hecnet-leave@lists.dfupdate.se