- HECnet - lists @ Update

Init'ing Mylex DAC stuff from within VMS?

by hvlems＠zonnet.nl

Yes, the utility exists but I've never installed it. You can initialize the controller and the arrays on a pc though. -----Oorspronkelijk bericht----- Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens Sampsa Laine Verzonden: maandag, september 2011 21:46 Aan: hecnet at Update.UU.SE Onderwerp: [HECnet] Init'ing Mylex DAC stuff from within VMS? So let's say I manage to get this second controller going, is there something like RCU to initialise the arrays from inside VMS whilst keeping the box running? I understand there's a SWXCR utility or something for this? Sampsa

13 years, 10 months

1
0
0 0

FW: [HECnet] And yet more begging: KZPAC style controller?

by hvlems＠zonnet.nl

-----Oorspronkelijk bericht----- Van: H Vlems [mailto:hvlems at zonnet.nl] Verzonden: maandag, september 2011 19:14 Aan: 'hecnet at Update.UU.SE' Onderwerp: RE: [HECnet] And yet more begging: KZPAC style controller? I get it, you show me yours and I show your mine, right ;-) Your photo shows a large pcb on top of the connector I referred to. See picture *92 for an overall view of the controller. Photo *91 shows the PCB in some more detail while photo *90 shows the socket itself. I hope this helps, but if the big PCB on your controller uses the same socket (or so it seems) then please ignore my previous post on this subject. Hans -----Oorspronkelijk bericht----- Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens Sampsa Laine Verzonden: maandag, september 2011 18:47 Aan: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] And yet more begging: KZPAC style controller? Here's a photo of mine, can you draw the bit I need to change onto it, or the general area: http://sampsa.com/wp-content/kzstyleboard.jpg On 5 Sep 2011, at 17:28, Sampsa Laine wrote: Any photos? I'm confused by the instructions. On 5 Sep 2011, at 17:16, hvlems at zonnet.nl wrote: Sampsa, study the small PCB that sits on top of double plastic connector. It's a kind of dipswitch: there's a connection to be made. Put the pcb of the working one iin the other. Verzonden vanaf mijn draadloze BlackBerryR-toestel -----Original Message----- From: Sampsa Laine <sampsa at mac.com> Sender: owner-hecnet at Update.UU.SE Date: Mon, 05 Sep 2011 16:42:39 To: <hecnet at Update.UU.SE> Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] And yet more begging: KZPAC style controller? Yup, bought a 3 channel Mylex card, even showed up in SRM as drb, happily ran the RCU to build the drives. Then VMS doesn't see it. AAAAAAAAAAAAAAAAARGH. I think they did more than rebrand it. Sampsa On 5 Sep 2011, at 14:45, hvlems at zonnet.nl wrote: The KZPAC is DEC's codename for the Mylex 960 RAID controller, right? ------Origineel bericht------ Van: Sampsa Laine Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: [HECnet] And yet more begging: KZPAC style controller? Verzonden: 5 september 2011 10:33 I've finally brought CHIMPY up from the dead, and are using its internal KZPAC to drive a BA365. I've LOVE another kzpac controlller. and if you have a spare, any chance you can consider a donation... Sampsa Verzonden vanaf mijn draadloze BlackBerryR-toestel

13 years, 10 months

1
0
0 0

Init'ing Mylex DAC stuff from within VMS?

by sampsa＠mac.com

So let's say I manage to get this second controller going, is there something like RCU to initialise the arrays from inside VMS whilst keeping the box running? I understand there's a SWXCR utility or something for this? Sampsa

13 years, 10 months

1
0
0 0

And yet more begging: KZPAC style controller?

by sampsa＠mac.com

Still didn't get it, prob some stupid mail filter somewhere - got a website to upload it to? On 5 Sep 2011, at 19:40, hvlems at zonnet.nl wrote: Ok, I'll resend it Verzonden vanaf mijn draadloze BlackBerry -toestel -----Original Message----- From: Sampsa Laine <sampsa at mac.com> Sender: owner-hecnet at Update.UU.SE Date: Mon, 05 Sep 2011 19:26:10 To: <hecnet at Update.UU.SE> Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] And yet more begging: KZPAC style controller? By the way, the majordomo does not seem to like large attachments so if you want to send back a picture file send in directly to sampsa at mac.com. Sampsa On 5 Sep 2011, at 17:47, Sampsa Laine wrote: Here's a photo of mine, can you draw the bit I need to change onto it, or the general area: http://sampsa.com/wp-content/kzstyleboard.jpg On 5 Sep 2011, at 17:28, Sampsa Laine wrote: Any photos? I'm confused by the instructions. On 5 Sep 2011, at 17:16, hvlems at zonnet.nl wrote: Sampsa, study the small PCB that sits on top of double plastic connector. It's a kind of dipswitch: there's a connection to be made. Put the pcb of the working one iin the other. Verzonden vanaf mijn draadloze BlackBerry -toestel -----Original Message----- From: Sampsa Laine <sampsa at mac.com> Sender: owner-hecnet at Update.UU.SE Date: Mon, 05 Sep 2011 16:42:39 To: <hecnet at Update.UU.SE> Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] And yet more begging: KZPAC style controller? Yup, bought a 3 channel Mylex card, even showed up in SRM as drb, happily ran the RCU to build the drives. Then VMS doesn't see it. AAAAAAAAAAAAAAAAARGH. I think they did more than rebrand it. Sampsa On 5 Sep 2011, at 14:45, hvlems at zonnet.nl wrote: The KZPAC is DEC's codename for the Mylex 960 RAID controller, right? ------Origineel bericht------ Van: Sampsa Laine Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: [HECnet] And yet more begging: KZPAC style controller? Verzonden: 5 september 2011 10:33 I've finally brought CHIMPY up from the dead, and are using its internal KZPAC to drive a BA365. I've LOVE another kzpac controlller. and if you have a spare, any chance you can consider a donation... Sampsa Verzonden vanaf mijn draadloze BlackBerry -toestel

13 years, 10 months

1
0
0 0

Anyone with a spare MMJ cable + RS232 adapter?

by phil＠rephil.org

On Mon, September 5, 2011 10:44 am, Sampsa Laine wrote: I think Phil Mendelsohn made a bunch and is waiting to mail them as soon as I send him the dough :) Um, here's the part where I'm afraid we got wires crossed. I made you MMJ to MMJ, as we confirmed. Now I'm hoping that's right. The other thing you'll need to e-mail me is your snail-mail address, or I'll have to send them General Delivery. Or maybe I'll mail them to Santa and he'll find you. ;) Phil - what are the options,usually the middle one is the reasonable one. Already sent via private e-mail; unfortunately, I'm migrating e-mail servers, and outgoing has been sent from gmail / other various servers not subscribed to this list. Cheers, Phil -- "Nothing is too small to know, and nothing to big to attempt." --Sir William Cornelius Van Horne

13 years, 10 months

1
0
0 0

And yet more begging: KZPAC style controller?

by hvlems＠zonnet.nl

Ok, I'll resend it Verzonden vanaf mijn draadloze BlackBerry -toestel -----Original Message----- From: Sampsa Laine <sampsa at mac.com> Sender: owner-hecnet at Update.UU.SE Date: Mon, 05 Sep 2011 19:26:10 To: <hecnet at Update.UU.SE> Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] And yet more begging: KZPAC style controller? By the way, the majordomo does not seem to like large attachments so if you want to send back a picture file send in directly to sampsa at mac.com. Sampsa On 5 Sep 2011, at 17:47, Sampsa Laine wrote: Here's a photo of mine, can you draw the bit I need to change onto it, or the general area: http://sampsa.com/wp-content/kzstyleboard.jpg On 5 Sep 2011, at 17:28, Sampsa Laine wrote: Any photos? I'm confused by the instructions. On 5 Sep 2011, at 17:16, hvlems at zonnet.nl wrote: Sampsa, study the small PCB that sits on top of double plastic connector. It's a kind of dipswitch: there's a connection to be made. Put the pcb of the working one iin the other. Verzonden vanaf mijn draadloze BlackBerry -toestel -----Original Message----- From: Sampsa Laine <sampsa at mac.com> Sender: owner-hecnet at Update.UU.SE Date: Mon, 05 Sep 2011 16:42:39 To: <hecnet at Update.UU.SE> Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] And yet more begging: KZPAC style controller? Yup, bought a 3 channel Mylex card, even showed up in SRM as drb, happily ran the RCU to build the drives. Then VMS doesn't see it. AAAAAAAAAAAAAAAAARGH. I think they did more than rebrand it. Sampsa On 5 Sep 2011, at 14:45, hvlems at zonnet.nl wrote: The KZPAC is DEC's codename for the Mylex 960 RAID controller, right? ------Origineel bericht------ Van: Sampsa Laine Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: [HECnet] And yet more begging: KZPAC style controller? Verzonden: 5 september 2011 10:33 I've finally brought CHIMPY up from the dead, and are using its internal KZPAC to drive a BA365. I've LOVE another kzpac controlller. and if you have a spare, any chance you can consider a donation... Sampsa Verzonden vanaf mijn draadloze BlackBerry -toestel

13 years, 10 months

1
0
0 0

GORVAX MULTINET users

by sampsa＠mac.com

Just FYI, GORVAX is now at 188.220.63.6. Sampsa

13 years, 10 months

1
0
0 0

And yet more begging: KZPAC style controller?

by sampsa＠mac.com

By the way, the majordomo does not seem to like large attachments so if you want to send back a picture file send in directly to sampsa at mac.com. Sampsa On 5 Sep 2011, at 17:47, Sampsa Laine wrote: Here's a photo of mine, can you draw the bit I need to change onto it, or the general area: http://sampsa.com/wp-content/kzstyleboard.jpg On 5 Sep 2011, at 17:28, Sampsa Laine wrote: Any photos? I'm confused by the instructions. On 5 Sep 2011, at 17:16, hvlems at zonnet.nl wrote: Sampsa, study the small PCB that sits on top of double plastic connector. It's a kind of dipswitch: there's a connection to be made. Put the pcb of the working one iin the other. Verzonden vanaf mijn draadloze BlackBerry -toestel -----Original Message----- From: Sampsa Laine <sampsa at mac.com> Sender: owner-hecnet at Update.UU.SE Date: Mon, 05 Sep 2011 16:42:39 To: <hecnet at Update.UU.SE> Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] And yet more begging: KZPAC style controller? Yup, bought a 3 channel Mylex card, even showed up in SRM as drb, happily ran the RCU to build the drives. Then VMS doesn't see it. AAAAAAAAAAAAAAAAARGH. I think they did more than rebrand it. Sampsa On 5 Sep 2011, at 14:45, hvlems at zonnet.nl wrote: The KZPAC is DEC's codename for the Mylex 960 RAID controller, right? ------Origineel bericht------ Van: Sampsa Laine Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: [HECnet] And yet more begging: KZPAC style controller? Verzonden: 5 september 2011 10:33 I've finally brought CHIMPY up from the dead, and are using its internal KZPAC to drive a BA365. I've LOVE another kzpac controlller. and if you have a spare, any chance you can consider a donation... Sampsa Verzonden vanaf mijn draadloze BlackBerry -toestel

13 years, 10 months

1
0
0 0

And yet more begging: KZPAC style controller?

by sampsa＠mac.com

Here's a photo of mine, can you draw the bit I need to change onto it, or the general area: http://sampsa.com/wp-content/kzstyleboard.jpg On 5 Sep 2011, at 17:28, Sampsa Laine wrote: Any photos? I'm confused by the instructions. On 5 Sep 2011, at 17:16, hvlems at zonnet.nl wrote: Sampsa, study the small PCB that sits on top of double plastic connector. It's a kind of dipswitch: there's a connection to be made. Put the pcb of the working one iin the other. Verzonden vanaf mijn draadloze BlackBerry -toestel -----Original Message----- From: Sampsa Laine <sampsa at mac.com> Sender: owner-hecnet at Update.UU.SE Date: Mon, 05 Sep 2011 16:42:39 To: <hecnet at Update.UU.SE> Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] And yet more begging: KZPAC style controller? Yup, bought a 3 channel Mylex card, even showed up in SRM as drb, happily ran the RCU to build the drives. Then VMS doesn't see it. AAAAAAAAAAAAAAAAARGH. I think they did more than rebrand it. Sampsa On 5 Sep 2011, at 14:45, hvlems at zonnet.nl wrote: The KZPAC is DEC's codename for the Mylex 960 RAID controller, right? ------Origineel bericht------ Van: Sampsa Laine Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: [HECnet] And yet more begging: KZPAC style controller? Verzonden: 5 september 2011 10:33 I've finally brought CHIMPY up from the dead, and are using its internal KZPAC to drive a BA365. I've LOVE another kzpac controlller. and if you have a spare, any chance you can consider a donation... Sampsa Verzonden vanaf mijn draadloze BlackBerry -toestel

13 years, 10 months

1
0
0 0

And yet more begging: KZPAC style controller?

by sampsa＠mac.com

Any photos? I'm confused by the instructions. On 5 Sep 2011, at 17:16, hvlems at zonnet.nl wrote: Sampsa, study the small PCB that sits on top of double plastic connector. It's a kind of dipswitch: there's a connection to be made. Put the pcb of the working one iin the other. Verzonden vanaf mijn draadloze BlackBerry -toestel -----Original Message----- From: Sampsa Laine <sampsa at mac.com> Sender: owner-hecnet at Update.UU.SE Date: Mon, 05 Sep 2011 16:42:39 To: <hecnet at Update.UU.SE> Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] And yet more begging: KZPAC style controller? Yup, bought a 3 channel Mylex card, even showed up in SRM as drb, happily ran the RCU to build the drives. Then VMS doesn't see it. AAAAAAAAAAAAAAAAARGH. I think they did more than rebrand it. Sampsa On 5 Sep 2011, at 14:45, hvlems at zonnet.nl wrote: The KZPAC is DEC's codename for the Mylex 960 RAID controller, right? ------Origineel bericht------ Van: Sampsa Laine Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: [HECnet] And yet more begging: KZPAC style controller? Verzonden: 5 september 2011 10:33 I've finally brought CHIMPY up from the dead, and are using its internal KZPAC to drive a BA365. I've LOVE another kzpac controlller. and if you have a spare, any chance you can consider a donation... Sampsa Verzonden vanaf mijn draadloze BlackBerry -toestel

13 years, 10 months

1
0
0 0

And yet more begging: KZPAC style controller?

by hvlems＠zonnet.nl

Sampsa, study the small PCB that sits on top of double plastic connector. It's a kind of dipswitch: there's a connection to be made. Put the pcb of the working one iin the other. Verzonden vanaf mijn draadloze BlackBerry -toestel -----Original Message----- From: Sampsa Laine <sampsa at mac.com> Sender: owner-hecnet at Update.UU.SE Date: Mon, 05 Sep 2011 16:42:39 To: <hecnet at Update.UU.SE> Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] And yet more begging: KZPAC style controller? Yup, bought a 3 channel Mylex card, even showed up in SRM as drb, happily ran the RCU to build the drives. Then VMS doesn't see it. AAAAAAAAAAAAAAAAARGH. I think they did more than rebrand it. Sampsa On 5 Sep 2011, at 14:45, hvlems at zonnet.nl wrote: The KZPAC is DEC's codename for the Mylex 960 RAID controller, right? ------Origineel bericht------ Van: Sampsa Laine Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: [HECnet] And yet more begging: KZPAC style controller? Verzonden: 5 september 2011 10:33 I've finally brought CHIMPY up from the dead, and are using its internal KZPAC to drive a BA365. I've LOVE another kzpac controlller. and if you have a spare, any chance you can consider a donation... Sampsa Verzonden vanaf mijn draadloze BlackBerry -toestel

13 years, 10 months

1
0
0 0

Anyone with a spare MMJ cable + RS232 adapter?

by sampsa＠mac.com

I think Phil Mendelsohn made a bunch and is waiting to mail them as soon as I send him the dough :) Phil - what are the options,usually the middle one is the reasonable one. Sampsa On 5 Sep 2011, at 16:04, Chrissie Caulfield wrote: Sorry for the delay - yes I have an MMJ to DB9-F cable. Let me know your address and I'll post it to you. Chrissie On 31/08/11 09:38, Sampsa Laine wrote: Those would be very welcome as well, esp the ones that are wired to a DB9-F on the other end. Sampsa On 31 Aug 2011, at 09:31, Chrissie Caulfield wrote: On 30/08/11 18:39, Sampsa Laine wrote: Or other sane mechanism for getting a graphical console up on an AS800? I want to add some controllers and drives to CHIMPY? I might have some home-made (ie very dodgy) ones lying around a cupboard -- Chrissie

13 years, 10 months

1
0
0 0

And yet more begging: KZPAC style controller?

by sampsa＠mac.com

Yup, bought a 3 channel Mylex card, even showed up in SRM as drb, happily ran the RCU to build the drives. Then VMS doesn't see it. AAAAAAAAAAAAAAAAARGH. I think they did more than rebrand it. Sampsa On 5 Sep 2011, at 14:45, hvlems at zonnet.nl wrote: The KZPAC is DEC's codename for the Mylex 960 RAID controller, right? ------Origineel bericht------ Van: Sampsa Laine Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: [HECnet] And yet more begging: KZPAC style controller? Verzonden: 5 september 2011 10:33 I've finally brought CHIMPY up from the dead, and are using its internal KZPAC to drive a BA365. I've LOVE another kzpac controlller. and if you have a spare, any chance you can consider a donation... Sampsa Verzonden vanaf mijn draadloze BlackBerry -toestel

13 years, 10 months

1
0
0 0

Anyone with a spare MMJ cable + RS232 adapter?

by christine.caulfield＠googlemail.com

Sorry for the delay - yes I have an MMJ to DB9-F cable. Let me know your address and I'll post it to you. Chrissie On 31/08/11 09:38, Sampsa Laine wrote: Those would be very welcome as well, esp the ones that are wired to a DB9-F on the other end. Sampsa On 31 Aug 2011, at 09:31, Chrissie Caulfield wrote: On 30/08/11 18:39, Sampsa Laine wrote: Or other sane mechanism for getting a graphical console up on an AS800? I want to add some controllers and drives to CHIMPY? I might have some home-made (ie very dodgy) ones lying around a cupboard -- Chrissie

13 years, 10 months

1
0
0 0

And yet more begging: KZPAC style controller?

by uusimaki＠exdecfinland.org

That's correct. There were three different versions: RaidArray 200 = KZESC (Eisa, FastSCSI) RaidArray 230 = KZPSC (PCI, FastSCSI) RaidArray 230+ = KZPAC (PCI, UltraSCSI) All of them were rebranded Mylex Raid adapters. Either one or three channel. The two channnel version were not offered to Alpha customers. I think the PC line had it in the selection. Regards, Kari On 5.9.2011 16:45, hvlems at zonnet.nl wrote: The KZPAC is DEC's codename for the Mylex 960 RAID controller, right? ------Origineel bericht------ Van: Sampsa Laine Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: [HECnet] And yet more begging: KZPAC style controller? Verzonden: 5 september 2011 10:33 I've finally brought CHIMPY up from the dead, and are using its internal KZPAC to drive a BA365. I've LOVE another kzpac controlller. and if you have a spare, any chance you can consider a donation... Sampsa Verzonden vanaf mijn draadloze BlackBerry -toestel

13 years, 10 months

1
0
0 0

And yet more begging: KZPAC style controller?

by hvlems＠zonnet.nl

The KZPAC is DEC's codename for the Mylex 960 RAID controller, right? ------Origineel bericht------ Van: Sampsa Laine Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: [HECnet] And yet more begging: KZPAC style controller? Verzonden: 5 september 2011 10:33 I've finally brought CHIMPY up from the dead, and are using its internal KZPAC to drive a BA365. I've LOVE another kzpac controlller. and if you have a spare, any chance you can consider a donation... Sampsa Verzonden vanaf mijn draadloze BlackBerry -toestel

13 years, 10 months

1
0
0 0

And yet more begging: KZPAC style controller?

by sampsa＠mac.com

I've finally brought CHIMPY up from the dead, and are using its internal KZPAC to drive a BA365. I've LOVE another kzpac controlller. and if you have a spare, any chance you can consider a donation... Sampsa

13 years, 10 months

1
0
0 0

Anyone with a spare MMJ cable + RS232 adapter?

by schwa.phil＠gmail.com

On 11-09-04 03:49 PM, Sampsa Laine wrote: What are the options? Looks like around about $4-5 for a padded envelope in "4-7 business days", jumping to $50 for 4, up to about $100 for about 3. Purolator is about $85 for 2 days, and I'm not even going to check UPS because they're a pain. Or for air fare and expenses, I'll hand deliver. ;) IIRC, you're in UK, so that's what I used. I also guesstimated they are just under 100g. If it's 100 - 200 g, only the slow postal option goes up to $7.20. You can check yourself at canadapost.ca, from postal code R0A 0X0. Sorry we've got delayed by the holiday weekend - I'll send it Tues. Cheers, Phil

13 years, 10 months

1
0
0 0

Bridge to update?

by bqt＠softjar.se

On 2011-09-03 16:06, Jesper Christensen wrote: On Sat, 03 Sep 2011, Sampsa Laine wrote: Anyone else having problems? We had to shut Psilocybe (the machine running the bridge here at Update) down to poke a bit at the UPS to which the machine is connected. The bridge software is, afaik, not started at boot and I have no idea how to start it so the bridge will probably be down until Johnny can start it again. Sorry about the inconvenience. Yeah. I should fix that at some point... :-/ Never have enough time to do everything I'd like to do... Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

13 years, 10 months

1
0
0 0

Bridge to update?

by sampsa＠mac.com

Signed PGP part Ok, no worries, stops me from ripping my router / server configs to bits, however :) On 3 Sep 2011, at 15:06, Jesper Christensen wrote: > On Sat, 03 Sep 2011, Sampsa Laine wrote: >> Anyone else having problems? >> >> > > We had to shut Psilocybe (the machine running the bridge here at > Update) down to poke a bit at the UPS to which the machine is > connected. The bridge software is, afaik, not started at boot and I > have no idea how to start it so the bridge will probably be down until > Johnny can start it again. > > Sorry about the inconvenience. > > /Jesper

13 years, 10 months

1
0
0 0

Bridge to update?

by vol＠Update.UU.SE

On Sat, 03 Sep 2011, Sampsa Laine wrote: Anyone else having problems? We had to shut Psilocybe (the machine running the bridge here at Update) down to poke a bit at the UPS to which the machine is connected. The bridge software is, afaik, not started at boot and I have no idea how to start it so the bridge will probably be down until Johnny can start it again. Sorry about the inconvenience. /Jesper

13 years, 10 months

1
0
0 0

Bridge to update?

by sampsa＠mac.com

Anyone else having problems?

13 years, 10 months

1
0
0 0

DECnet performance problems (on TOPS-10)

by hvlems＠zonnet.nl

I have no V4 system running right now. I thought that the /application_protocol switch had been present since V3.4 or so. ------Origineel bericht------ Van: gerry77 at mail.com Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] DECnet performance problems (on TOPS-10) Verzonden: 3 september 2011 14:23 On Sat, 3 Sep 2011 11:46:33 +0000, you wrote: $ set host/applic=rterm <nodename> Yes, but not on VAX/VMS V4... :-) G. Verzonden vanaf mijn draadloze BlackBerry -toestel

13 years, 10 months

1
0
0 0

DECnet performance problems (on TOPS-10)

by gerry77＠mail.com

On Sat, 3 Sep 2011 11:46:33 +0000, you wrote: $ set host/applic=rterm <nodename> Yes, but not on VAX/VMS V4... :-) G.

13 years, 10 months

1
0
0 0

DECnet performance problems (on TOPS-10)

by hvlems＠zonnet.nl

Oh there is: $ set host/applic=rterm <nodename> Hans ------Origineel bericht------ Van: gerry77 at mail.com Afzender: owner-hecnet at Update.UU.SE Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] DECnet performance problems (on TOPS-10) Verzonden: 3 september 2011 13:09 On Fri, 02 Sep 2011 23:38:09 +0200, you wrote: Indeed, I was also looking for a third-party implementation in the DECUS archives: if I'm not wrong, older VMS like V4.7 already did CTERM, but had no /APP=R qualifier in SET HOST, so there was no apparent way to switch from CTERM back to RTERM like we can do now with newer VMS. So, I was hoping someone back then wrote a RTERM client to be used with such vintage VMS releases (which I'd try in V8), but I've still found nothing. :-\ I bet it was a separate application back in VMS V4, instead of being a switch to SET HOST. Or else a different switch back then... Not really: I've just discovered that RTPAD.EXE (the program behind the SET HOST command) falls back to RTERM if CTERM cannot be used, e.g. if object 42 is not defined at the remote node. This at least in V4.7. :) (There is apparently no way to use RTERM when CTERM is available.) Bye, G. Verzonden vanaf mijn draadloze BlackBerry -toestel

13 years, 10 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet